A company that challenges and innovates based on principles and trust

PRODUCT

가소제

Plasticizer is an additive for plastic and rubber to lower the melting temperature or melting viscosity to facilitate molding and to give the molded product flexibility.

It should be able to mix well with polymers. It increases plasticity and improves heat resistance, cold resistance, flame resistance, electrical properties, etc.

Characteristic

Type Characteristic Product
Phthalate series
  1. It is the most commonly used plasticizer due to its excellent compatibility with PVC.
 DOP, DIDP, DINP, DBP
Trimelitic acid series
  1. Although compatibility and plasticizing efficiency are lower than phthalic acid systems, it is often used for heat-resistant wires due to its low volatility, oil resistance, and heat resistance.
 TOTM
Aliphatic system
  1. It is a secondary plasticizer and widely used as a cold-resistant plasticizer due to its low-temperature flexibility.
 DOA
Chlorine system
  1. It has long been used as a secondary plasticizer as a compound with a structure similar to PVC.
  2. The higher the chlorine content, the better the flame retardancy, compatibility, and migration resistance.
 Paraffin chloride
Non-Phthalate
  1. It is a non-phthalate plasticizer that is free from environmental regulations because it does not contain 15 species of phthalates, six major heavy metals, and SVHC, and does not belong to harmful/risk classification in various toxic experiments.
 GL300, GL500, ATBC